|
|
|
| Home > Products > LD Range > LD-PRC |
LD-PRC - 4-20mA Controller
This no-fuss panel meter is ideal for all process applications. One key feature is its simple (key-in) calibration procedure, which removes the need for an input signal during calibration.
- Current (0/4-20mA) or voltage (0-2/10V) input
- Input signal averaging
- Large, easy to read display
- Simple, intuitive interface with scrolling text prompts
- Factory precalibrated. Key-in recalibration (no input signal needed)
- Security PIN protected calibration and setpoint access
- Selectable decimal point position and rounding
|
- Specifications
- Display & Casing
LD-PRC-I - Indicator
LD-PRC-R4 - 4 x relays
LD-PRC-R4A - 4 x relays, 1 x analogue output |
|
| Input signal |
Current (0/4-20mA)
Voltage (0-2/10V) |
| Power supply |
HV: 85-265V AC/95-370V DC OR
LV: 15-48V AC/10-72V DC |
| Excitation |
24V |
| Sampling rate |
10Hz |
| Resolution |
16-bit |
| Accuracy |
0.05% of reading |
| Temperature drift |
Typically 50ppm/°C |
| |
| Relay outputs |
4 x programmable 5A form A relays
Includes hysteresis, delay on make and enabling of 4 x LED annunciators for alarms and relay status indication
|
| Analogue output |
1 x isolated 16-bit 4-20mA or 0-10V output
Window programmable over any range within the full scale range of the
controller. |
- 5 buttons
- 4 setpoint indicator LEDs (R4 and R4A only)
- 20mm LED display, 4 digits
|
- IP65 dust and splash proof
- Panel mount case: 48 x 96 x 120mm (H x W x D)
- Panel cutout: 45.5 x 92.5mm
|
|
|
|
|
|
|
)
