|
|
|
| Home > Products > LD Range > LD-TC |
LD-TC - Temperature Controller
This universal thermocouple temperature controller is suitable for all common thermocouple probe types, and is ideal for indication and alarm control temperature applications.
- Universal thermocouple input
- Input signal averaging
- B-type, J-type, K-type, N-type, R-type, S-type or T-type TC sensors
- Large, easy to read display
- Simple, intuitive interface with scrolling text prompts
- Factory precalibrated. Key-in recalibration (no input signal needed)
- Security PIN protected calibration and setpoint access
- Selectable decimal point position and rounding
|
- Specifications
- Display & Casing
LD-TC-I - Indicator
LD-TC-R4 - 4 x relays
LD-TC-R4A - 4 x relays, 1 x analogue output |
|
| Sensor types |
Thermocouple B-type, J-type, K-type, N-type, R-type, S-type or T-type |
| Power supply |
HV: 85-265V AC/95-370V DC OR
LV: 15-48V AC/10-72V DC |
| Sampling rate |
2.5Hz |
| Resolution |
16-bit |
| Accuracy |
0.05% of reading |
| Temperature scale |
°C or °F |
| Temperature drift |
Typically 50ppm/°C |
| |
| Relay outputs |
4 x programmable 5A form A relays
Includes hysteresis, delay on make and enabling of 4 x LED annunciators for alarms and relay status indication
|
| Analogue output |
1 x isolated 16-bit 4-20mA or 0-10V output
Window programmable over any range within the full scale range of the
controller. |
- 5 buttons
- 4 setpoint indicator LEDs (R4 and R4A only)
- 20mm LED display, 4 digits
|
- IP65 dust and splash proof
- Panel mount case: 48 x 96 x 120mm (H x W x D)
- Panel cutout: 45.5 x 92.5mm
|
|
|
|
|
|
|
)
