|
|
|
| Home > Products > PRO Range > PRO-CTR100 |
PRO-CTR100 - Counter/Rate Batching Controller
This advanced controller is ideal for a wide variety of rate monitoring and batching applications. It has a variety of advanced features, including: batching, batch count modification, user programmable input functions, setpoint tracking, setpoint latching and startup inhibit.
- Quadrature (x1, x2, x4), NPN, PNP or TTL sensors (3 x counter inputs available)
- Signal averaging on the rate
- Simple, intuitive interface with scrolling text prompts
- User programmable front-panel button
- Security PIN protected setup
|
- Specifications
- Display & Casing
PRO-CTR100-I - Indicator
PRO-CTR100-R4 - 4 x relays
PRO-CTR100-R4A - 4 x relays, 1 x analogue output
PRO-CTR100-R4S - 4 x relays, 1 x serial port
PRO-CTR100-R4AS - 4 x relays, 1 x analogue output, 1 x serial port |
|
| Power supply |
HV: 85-265V AC/95-370V DC OR
LV: 15-48V AC/10-72V DC |
| Sensor types |
Quadrature (x1, x2, x4), NPN, PNP or TTL (3 x counter inputs available) |
| Noise filtering |
20kHz or Off |
| Excitation |
5/24V DC (200/50mA max) |
| Pulse width |
Must be > 5µs |
| |
| Input frequency |
10kHz (Quad x4, A, B)
20kHz (Quad x1, Quad x 2)
38kHZ (C) |
| Sampling rate |
10msec |
| |
| Input frequency |
20kHz max |
| Sampling rate |
100msec |
| Resolution |
0.01Hz |
| Accuracy |
0.005% |
| Temperature drift |
Typically 2ppm/°C |
| |
| Relay outputs |
4 x 5A form A relay outputs. Includes 4 setpoints with hysteresis, delay on make and front panel indicator LEDs. |
| Analogue output |
1 x isolated 16-bit 4-20mA or 0-10V output
Window programmable over any range within the full scale range of the
controller. |
| Serial port |
Isolated RS232 or RS485 serial output
Modes: Texmate NZ ASCII, Modbus/RTU slave, Ranger A
Data rates: 1200-115k2 baud
Parity: Odd/even/none |
- 5 buttons
- 13mm LED display, 6 digits
- 6 indicator LEDs
- IP65 dust and splash proof
|
- Panel mount case: 48 x 96 x 120mm (H x W x D)
- Panel cutout: 45.5 x 92.5mm
|
|
|
|
|
|
|
)
