|
|
|
| Home > Products > SC Range > SC-TC |
SC-TC - Temperature Controller
This temperature controller accepts input from a wide range of thermocouple sensor types, and is ideal for a variety of temperature applications requiring high levels of precision and resolution. It can be set to read °C or °F, and features a built in LCD dual display for simple operator interface.
- Universal thermocouple input
- B-type, J-type, K-type, N-type, R-type, S-type or T-type TC sensors
- Input signal averaging
- Suits a variety of applications requiring high precision and resolution
- Factory precalibrated for K-type input
- Dual display rows
- Simple, intuitive interface with scrolling text prompts
- Security PIN protected setup and setpoint access
|
- Specifications
- Display & Casing
SC-TC-R2 - 2 x relays
SC-TC-R2A - 2 x relays, 1 x analogue output
SC-TC-R2S - 2 x relays, 1 x serial port
SC-TC-R2AS - 2 x relays, 1 x analogue output, 1 x serial port |
|
| Sensor types |
Thermocouple B-type, J-type, K-type, N-type, R-type, S-type or T-type |
| Power supply |
HV: 85-265V AC/95-370V DC OR
LV: 15-48V AC/10-72V DC |
| Sampling rate |
2.5Hz |
| Resolution |
16-bit |
| Accuracy |
0.05% of reading |
| Temperature scale |
°C or °F |
| Temperature drift |
Typically 50ppm/°C |
| Relay outputs |
2 x 5A form A relay outputs.
Includes 2 setpoints with setpoint tracking, hysteresis and delay on make |
| |
| Analogue output |
1 x isolated 16-bit 4-20mA or 0-10V output
Window programmable over any range within the full scale range of the
controller. |
| Serial port |
Isolated RS232 or RS485 serial output
Modes: Texmate NZ ASCII, Modbus/RTU slave, Ranger A
Data rates: 300-38400 baud.
Parity: Odd/even/none |
|
- 5 buttons
- 2 x 8mm, 8-digit LCD display rows
- 35mm DIN mount case: 101 x 45 x 120mm (H x W x D)
- Serial terminal (active on R2S/R2AS models only)
|
|
|
|
)
