|
|
|
| Home > Products > SC Range > SC-UAC |
SC-UAC - Universal AC Controller
This universal AC controller is ideal for a variety of applications, including: power current measurement, noise current/voltage measurement or power factor measurement. It can be easily scaled to your preferred CT ratio, and features a built in LCD dual display for simple operator interface.
- Universal AC input - current (0-5A AC) or voltage (0-300V AC)
- Input signal averaging
- Ideal for a diverse range of applications, including power current measurement, noise current/voltage measurement and speed measurement from an AC tacho generator
- Easy to scale to your preferred CT ratio
- Key-in calibration (no input signal needed)
- Dual display rows with customisable display sources
- Simple, intuitive interface with scrolling text prompts
- Security PIN protected setup and setpoint access
|
- Specifications
- Display & Casing
SC-UAC-R2 - 2 x relays
SC-UAC-R2A - 2 x relays, 1 x analogue output
SC-UAC-R2S - 2 x relays, 1 x serial port
SC-UAC-R2AS - 2 x relays, 1 x analogue output, 1 x serial port |
|
| Input signal |
Current (0-5A AC)
Voltage (0-300V AC) |
| Power supply |
HV: 85-265V AC/95-370V DC OR
LV: 15-48V AC/10-72V DC |
| Accuracy |
True RMS current: 0.05%
True RMS voltage: 0.1%
Power: 0.1%
Frequency: 0.01Hz |
| Temperature drift |
Typically 50ppm/°C |
| Relay outputs |
2 x 5A form A relay outputs.
Includes 2 setpoints with setpoint tracking, hysteresis and delay on make |
| |
| Analogue output |
1 x isolated 16-bit 4-20mA or 0-10V output
Window programmable over any range within the full scale range of the
controller. |
| Serial port |
Isolated RS232 or RS485 serial output
Modes: Texmate NZ ASCII, Modbus/RTU slave, Ranger A
Data rates: 300-38400 baud.
Parity: Odd/even/none |
|
- 5 buttons
- 2 x 8mm, 8-digit LCD display rows
- 35mm DIN mount case: 101 x 45 x 120mm (H x W x D)
- Serial terminal (active on R2S/R2AS models only)
|
|
|
|
)
