|
|
|
| Home > Products > TEX Range > TEX-FLO10 |
TEX-FLO10 - Flow Rate Controller
This dual totaliser flow rate controller accepts a wide range of industrial pulse and frequency flow sensor types, and is ideal for a variety of flow applications including water treatment, irrigation and level control systems.
- NPN, PNP, TTL, namur, tacho or closed contact sensors
- Signal averaging
- Dual totalisers with low-flow cutoff and rollover functions
- Batching feature
- Volumetric pulse on Total 2 with adjustable pulse width
- Simple, intuitive interface with scrolling text prompts
- Security PIN protected setup
|
- Specifications
- Display & Casing
TEX-FLO10-I - Indicator
TEX-FLO10-R4 - 4 x relays
TEX-FLO10-R4A - 4 x relays, 1 x analogue output
TEX-FLO10-R4S - 4 x relays, 1 x serial port
TEX-FLO10-R4AS - 4 x relays, 1 x analogue output, 1 x serial port |
|
| Sensor types |
NPN, PNP, TTL, namur, tacho or closed contact |
| Power supply |
HV: 85-265V AC/95-370V DC OR
LV: 15-48V AC/10-72V DC |
| Noise filtering |
0.2, 2, 20kHz or Off |
| Excitation |
24V DC (50mA max) |
| Frequency |
2Hz to 10KHz |
| K factor ranges |
0.1 to 99.9999/999.999/9999.99 |
| Accuracy |
0.005% |
| Temperature drift |
Typically 2ppm/°C |
| Flow rate |
L/sec, L/min or L/hour |
| Flow resolution |
1ml, 10ml, 0.1L or 1L |
| Totalisers |
Dual totalisers. Reset via front panel or rear pins. Individually programmable for low flow cutoff and rollover. Volumetric pulse on Total 2, with adjustable pulse width from 0.1 to 10.0 seconds. |
| Totaliser resolution |
x0.1, x1, x10, x100 or cubic meters |
| |
| Relay outputs |
4 x 5A form A relay outputs. Includes 4 setpoints with hysteresis, delay on make and front panel indicator LEDs. |
| Analogue output |
1 x isolated 16-bit 4-20mA or 0-10V output
Window programmable over any range within the full scale range of the
controller. |
| Serial port |
Isolated RS232 or RS485 serial output
Modes: Texmate NZ ASCII, Modbus/RTU slave, Ranger A
Data rates: 300-38400 baud.
Parity: Odd/even/none |
- 5 buttons
- 13mm LED display, 6 digits
- 6 indicator LEDs
- IP65 dust and splash proof
|
- Panel mount case: 48 x 96 x 120mm (H x W x D)
- Panel cutout: 45.5 x 92.5mm
|
|
|
|
|
|
|
)
